|
|||||||||
|
|||||||||
|
|||||||||
Right Of Way Permits, Drives, Road Crossings & Road Closures |
|||||||||
$25 |
Each |
||||||||
| Fee applies to the construction of new Non-commercial drives, and must be paid in advance | |||||||||
$10 |
Each |
||||||||
| Reconstructed drives must meet current MCRC standards | |||||||||
$50 |
Each |
||||||||
| Commercial Drive | |||||||||
| Fee applies to the construction of new Commercial drives and must be paid in advance | |||||||||
Road Crossing Bore (Up to 4 inch diameter) |
$50 |
Each |
|||||||
| Road Crossing Bore (Larger than 4 inch diameter) | $100 |
Each |
|||||||
|
Applies to bore operations beneath all roads under the jurisdiction of the Mason County Road Commission. For transverse bore only, longitudinal bore will use Utility Installation Schedule. | ||||||||
Road Crossing Open Cut (Less than 4 feet deep) |
$200 |
Each | |||||||
| Road Crossing Open Cut (More than 4 feet deep) | $400 |
Each | |||||||
|
Contractor is required to hire testing firm to perform density testing of backfill materials to ensure compaction. In addition, if the County Engineer determines that an MCRC inspector is also necessary to oversee the open-cut operation, the contractor must pay $50.00 per hour for this inspection. Minimum charge is for two hours ($100.00) which is non-refundable. For transverse cut only, longitudinal cut will use Utility Installation Schedule. | ||||||||
$50 |
Per Parcel | ||||||||
| Will only be approved if property owner can maintain a swale ditch that is at least 18" below edge of shoulder. Acceptable tile materials are: CMP, Concrete, or DWPE (dual wall polyethylene plastic pipe.) DWPE can only be used when there is at least 2 1/2' of cover over pipe. Each closure is subject to approval by the County Engineer. | |||||||||
Please Make Checks Payable to the Mason County Road Commission |
|||||||||
